S/V Redeemer

132’ LOA X 30’ X 12.7’ 196.6 Gross Tons

ABS Certified Load Line

*          Propulsion by twin-screw Caterpillar 3508 main engines with A rating at 775 hp continuous, for a total of 1550 hp.  72” X 51”  5 blade SS propellers, will draw 100% HP @ 6 knots. Average cruising speed 10 knots.

*          Main auxiliary power provided by two 100 KW Gen Sets.

*          Bridge electronics include Furuno color depth sounder, (2) Furuno radar, (2) VHF radios, Trimple DPGS, Furuno GPS navigator, SSB radio, weather fax.

*          Sodium lights fore and aft.

*          Detachable: - Helicopter pad over aft deck   

  - Stern gantry

  - Stern ramp for roll on  / roll off

*          50 hp electric hydraulic pump and PTO driven hydraulic pumps supply power.

*          One 8-ton hydraulic deck crane.

*          Hydraulic driven Alman Johnston type tow winch w/ 100,000 # line pull set-up w/2,000 of 1 5/8” wire.

*          Tandem anchor windlass with 1 3/8” chain and 3,000 lb anchors.

*          15’ Zodiac hard bottom inflatable with 90 hp 4 stroke motor, mounted on a hydraulic davit for deployment in open water. Also smaller inflatables and motors stowed aboard.

*           Tandem drum winch for aft mooring or highline wire.

*          11-ton hydraulic winch on gantry.

*          Auxiliary hydraulic power available on deck via quick connect fittings.

*          Deck arrangements include large, open work deck (25’ x75’) with 24” diameter stern roller for anchor mooring gear or tow gear handling, hydraulic tow pins, bulwark fairleads, and two stern anchors.

*          There is a large amount of unassigned tank and/or cargo storage available.

*          Various salvage gear onboard including line gun, highline carriage, grapples, etc.

*          90 hp fire system for hose stations and bow monitor.

*          HP divers’ air system including cylinder bank and manifold.

 Contact: dmagone@arctic.net